SHERA Splendid Plank – a perfect fibre cement plank for modern architecture
SHERA splendid plank is a unique composite of natural fibres bonded tightly in a high-grade silicate structure. This autoclaved, wood-grain and smooth siding plank acquires impressive toughness, yet remains flexible and dimensionally stable. It is cellulose cement plank that contains absolutely NO asbestos fibre.
- Weather Resistant
- Immune to water damage
- Fire resistant
- Not brittle
- Low shrinkage
- High workability
- Termite resistant
SHERA Splendid Plank achieves the beautiful aesthetic grooves on the building walls with the edged profile of splendid siding. SHERA Splendid Plank is another version of lap siding with stand up the most demanding design. With SHERA Splendid Plank, ship-lapping installation is very simple and efficient. There are several designs of edge profiling available that not only provide innovative styles in for example home designs but also long lasting and less worry from humidity, heat, salt spray and flying debris. Primed planks can be coated before or after installation (double coating) with optional acrylic paint.
|ATSM||C1185, C1186-91||Flat Non-Asbestos Fibre-Cement sheets|
|ISO||8336: 1993||Fibre-Cement Flat sheets|
|AS/NZS|| 2908.2: 2000||Cellulose Cement Product Part2: Flat sheets|
|JIS||A5430 – 1995||Fibre Reinforced Cement Boards|
|EC Conformity||12467: 2004||Fibre-Cement Flat sheets|
|GreenLabel / Singapore||ASTM D5116-06||Emission Test|
|CarbonLabel / Thailand||Carbon Reduction|
|Pofile||Texture||Thickness (mm)||Width (mm)||Length (mm)||Weight (kg/pcs)|
|Smooth *||10*||300*||3000*||13.2 0*|
* Made to order item
Framing and Fixing
Framing: SHERA Splendid Plank can be fixed to both timber frames (minimum size 1.5 x 3 inch) or steel frames (thickness between 0.55 and 1.6 mm). Framing must be selected to provide sufficient strength to support the SHERA Splendid Plank siding.
Fixing: SHERA Splendid Planks can be fastened with nails or screws. It can be nailed directly to timber supports with round wire nails. When using metal screws, the size and length of the screw will be dependent on thickness of the Plank and the gauge of framing. Pre-drilling the board is a must unless self-embedding, self-drilling head screws such as SHERA FIX-W32G8 are used.
|Thickness Tolerance||+ 0.6 mm|
|Density||1250 - 1300 kg/m3|
|Modulus of Rupture||≥ 9 MPa|
|Modulus of Elasticity||7100 + 500 MPa (Wet)|
|Water Absorption||< 35%|
|Moisture Content||< 15%|
|Fire Resistance Properties|
|Fire Propagation Index||I = 0.1|
|Surface Spread of Flame||Class 1|
|Reaction to Fire Classification||A2-s1, d0|
|Fire Resistance Properties|
|Warm Water Resistance||Pass|
|Heat / Rain Resistance||Pass|
|Soak / Dry Resistance||Pass|
Installation: Fasteners must be located at more than 12 mm from plank edges and 20 mm from plank ends. SHERA Splendid Plank installation must be started at the bottom of the frame. Ship-lapping widths for each profile are different, see Installation manual for effective cover of each profile.
Tools: No special tools are required. The products can be used with normal nails, fastened by normal or self-drilling screws and cut by an electric power saw with diamond blade.
The following accessories are available for use with SHERA fibre cement planks.
Examples of SHERA fibre cement splendid planks
Deliver SHERA Splendid Plank to project site in original, unopened package and store them in fully enclosed space where they will be protected against damage from humidity, direct sunlight, surface contamination and other causes of damage. Handle SHERA Splendid Plank carefully to avoid chipping edges or damaging units in any way. Handling and storage practices should follow the manufacturer’s suggestions at all times.
Stack planks on a pallet. Cover with a tarpaulin or other waterproof sheeting.
Carry the planks as shown in order to avoid damage/breakage or injury.